Back to Top

1
Hi, Guest!
  • CONSORT BELGIA
  • C6010-C6030 Multiparameter analysers Consort Bvba Belgium

C6010-C6030 Multiparameter Analysers Consort Bvba Belgium

Update Terakhir
:
15 / 12 / 2020
Min. Pembelian
:
1 Unit

Harga

CALL
Anda butuh alat laboratorium dan reagents microbiology, segera hubungi Perusahan kami" . PT. SUMBER ARUM ABADI adalah distributor atau subdistributor supplier importir resmi Indonesia yang bergerak dibidang alat Laboratorium dan Microbiology di Surabaya Jawa Timur Indonesia , Dengan Merek Sebagai berikut : acumedia from neogen corp USA, merck KGaA Germany, sigma aldrich USA, waters For HPLC Ireland, ridacount, copan italy, biooscientific, difco, atago, bd, bbl, memmert, hirayama, atago, thermo scientific, thermolyne, funke gerber germany, warring, hach usa, olympus, seedburo, all american, vwr, sibata, horiba, uetech, yellowline, wildco, takemura, ATCC gibson laboratories Inc., As-One, pyrex, brand, biohit, axygen scientific, AZ Taiwan, boeco germany, gast vacuum pump, optika italy Microscope, motic Microscope, interscience france, hettich, and balance Japan, Ohaus Balances and Scale USA, mettler toledo balance USA, presica balance taiwan, kern balances germany, eppendorf, testo, velp scientifica, KNF neuberger, nabertherm vaccuum Pumps Germany, advantec toyo kaisha Ltd. Japan, kett Science And Sensing USA, eppendorf jerman, hanna instrument, IKA, hanil centrifuge taiwan, kern balances germany, GFL water still USA, acumedia, biogen, seward, wildco, haws, seward uk, witega germany, microessential, yazumi, neofilm neogen usa, pobel water stills spain, parafilm m bemis company inc. usa, sanita-kun japan, spectrum instruments australia, analytik jena germany, funke gerber germany, organomation usa, gibertini italy, stat fax 4200 microplate reader, stat fax 4700 microwell reader, automated elisa analyzer iea, labomed in. usa, deltatrak usa, miccroessentiallab usa dll

Detail C6010-C6030 Multiparameter Analysers Consort Bvba Belgium

ALAT LABORATORIUM AIR
Measurement Channels 1

Temperature Channels 1
pH -2.000…+16.000 pH
mV ±2000.0 mV
Ion (C6030 only) 0.01 ng/l…100 g/l
Conductivity 0…2000 mS/cm
Resistivity 0…200 MΩ.cm
Salinity 0.0…70.0
TDS 0…100.0 g/l
Dissolved oxygen 0…60.00 mg/l 0…600.0%t the complete temperature related table of your specifi buffr. Add up to 5 pH buffrs and 3 EC standards of your own choice and use them as if they are built-in. The device can be connected to a PC and comp
Air pressure 600…1300 hPa
Temperature -5.0…+105.0°C
Warranty 36 months
Made in Belgium
Portable and bench-top combined in 1 instrument.
Custom calibration tables allows the user to add complete buffr/standard-temperature relation tables. With this feature the built-in
tables can be extended with your own tables. Tables can be entered via a device menu or uploaded from a PC.
Stability indicator ensures visualisation when measurement has stabilised.
Stability algorithm ensures stable readings with ability to detect fast changes.
Hold function allows to freeze the display
Selectable resolution for more stable readings for mV, pH and DO.
Range lock for conductivity measurements.
Capacitive compensation eliminates the capacitive component of the electrode and cable at conductivity measurements
Galvanic isolated USB interface eliminates ground loop effcts when connected to a PC.
GPL report can be shown on the display or sent to the digital port.
Pre-programmed standards
pH: 1.68, 2.00, 4.00, 4.01, 6.87, 6.99, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C)
Conductivity: 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C)
Free software and fimware updates downloadable from www.consort.be
Description
Highlights
The C6010 and C6030 instruments are single channel multi parameter analysers suitable as bench-top and as portable device.
A corrosion resistant gold plated BNC connector ensures a long life in even harsh environments. The single BNC connection accepts
diffrent electrodes, including conductivity electrodes.
Via an easy to use menu system, the device can be confiured to do your measurements. A built-in help system will help you through
all steps for successfully use the instrument.
Besides the pre-programmed pH buffrs and EC standards, you can also add your own buffr and standard tables. Not just a certain
value at a certain temperature but the complete temperature related table of your specifi buffr. Add up to 5 pH buffrs and 3 EC
standards of your own choice and use them as if they are built-in.
The device can be connected to a PC and completely controlled

pH Range -2.000…+16.000 pH
Resolution 0.001 pH
Accuracy 0.1% ± 1 digit
Calibration 1…5 points
Buffrs 11 pre-programmed
5 user specifid
Temperature compensation -5.0…+105.0°C
ISO-pH 6.000…8.000 pH
Slope 80.0…120.0%
Zero point (Eo) ±999.0 mV
Selectable Resolution ü
mV Range ±2000.0 mV
Resolution 0.1 mV
Accuracy 0.1% ± 1 digit
Calibration 1 point
Selectable Resolution ü
CONDUCTIVITY Range (cc dependent) 0…2000 mS/cm
Resolution (cc dependent) 0.001 μS/cm
Accuracy 0.5% f.s. of range
Calibration 1…3 points
Standards 3 pre-programmed
3 user specifid
Cell constant (cc) 0.07…13 cm-1
Temperature compensation -5…+105°C
Reference temperature 20°, 25°C or of
Temperature coeffient natural waters (EN27888)
Range lock ü
Capacitive compensation ü
RESISTIVITY Range 0…200 MΩ.cm
Resolution 1 Ω.cm
SALINITY Range 0.0…70.0
Reference temperature 15°C
TDS Range 0…100.0 g/l
Resolution 0.01 mg/l
DISSOLVED
OXYGEN
Range 0…60.00mg/l
Resolution 0.01 mg/l
Accuracy 1% ± 1 digit
Calibration 1 point
Temperature compensation 0…50°C
Salinity compensation 0…40
Air pressure compensation 600…1300 hPa
Selectable Resolution ü
TEMPERATURE Range -5.0…+105.0°C
Resolution 0.1°C
Accuracy 0.1°C
Calibration 1 point
ION (C6030 only) Range 0.01 ng/l…100 g/l
Resolution 3 digits
Accuracy 0.5% ± 1 digit
Calibration 2…5 points + blank
AIR PRESSURE Range 600…1300 hPa
Calibration 1 point
CHANNELS Measurement 1
Temperature 1
INPUTS Measurement 1 BNC, 10 12Ω
Temperature 1×2 banana, for Pt1000
CALIBRATION Reminder 0…999 h
GLP ü
DISPLAY LCD 128×64 pixels
White back-light ü
Hold function ü
Selectable resolution ü
Real time clock ü
Built-in help ü
Languages English
Dutch
French
German
COMMUNICA
TION
Interface with computer USB
Baud rate 1200…115200 b/s
DATA-LOGGING Data sets 12000 + °C/date/time
Modes all
Manual or timed ü
Interval 1…9999 s
SECURITY Password protection ü
AMBIENT
CONDITIONS
Temperature 0…40°C
Humidity 0…95%, non condensin
POWER SUPPLY Mains 100…240 VAC, 50/60 H
Low voltage 9…15 VDC
Batteries (included) 4×1.2 V, AA, NiMH
DIMENSIONS WxDxH 12x25x5 cm
WEIGHT Meter 600g
Code Description
C6010 pH/conductivity/DO meter (USB version)
C6030 pH/Ion/conductivity/DO meter (USB version)
C60xxP pH meter kit, glass electrode: C60xx + pH/ATC electrode SP20T + 2×50 ml buffrs (pH 4 and 7) + 50 ml electrolyte (3M KCl) + carrying case
C60xxPE pH meter kit, epoxy electrode: C60xx + pH/ATC electrode SP10T + 2×50 ml buffrs (pH 4 and 7) + 50 ml electrolyte (3M KCl) + carrying case
C60xxPCH pH meter kit, spear electrode: C60xx + pH/ATC spear electrode SP24T + 2×50 ml buffrs (pH 4 and 7) + 50 ml electrolyte (3M KCl) + carrying case
C60xxK EC meter kit, glass electrode: C60xx + conductivity/ATC electrode SK20T + 50 ml conductivity standard (0.01 M KCl) + carrying case
C60xxKE EC meter kit, epoxy electrode: C60xx + conductivity/ATC electrode SK10T + 50 ml conductivity standard (0.01 M KCl) + carrying case
C60xxPK pH/EC meter kit, pH and EC glass electrodes: C60xx + pH/ATC electrode SP20T + conductivity/ATC electrode SK20T + 2×50 ml buffrs (pH 4 and 7)
+ 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01 M KCl) + carrying case
C60xxPKE pH/EC meter kit, pH and EC epoxy electrodes: C60xx + pH/ATC electrode SP10T + conductivity/ATC electrode SK10T + 2×50 ml buffrs (pH 4 and 7)
+ 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01 M KCl) + carrying case
C60xxZ DO meter kit: C60xx + dissolved oxygen electrode SZ10T + carrying case
C60xxT pH/EC/DO meter kit, pH and EC glass electrodes: C60xx + pH/ATC electrode SP20T + conductivity/ATC electrode SK20T + 2×50 ml buffrs (pH 4 and
+ 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01 M KCl) + dissolved oxygen electrode SZ10T + carrying case
C60xxTE pH/EC/DO meter kit, pH and EC epoxy electrodes: C60xx + pH/ATC electrode SP10T + conductivity/ATC electrode SK10T + 2×50 ml buffrs (pH 4 and
+ 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01 M KCl) + dissolved oxygen electrode SZ10T + carrying case
C60xxX Meter kit without electrodes: meter + 2×50 ml buffrs (pH 4 and 7) + 50 ml electrolyte (3M KCl) + 50 ml conductivity standard (0.01 M KCl)
+ carrying case
SH300 Flexible electrode holder (optional)
ADAPT-CAR Car adaptor, 12 V (optional)
Supplied with a mains adaptor (100…240 VAC, EU/US) and USB cable. Add -UK for UK plug versions, -CH for Swiss plug versions.
Ordering codes
Specifiations

Tampilkan Lebih Banyak
Kontak Kami